| • |
Kompatibel mit jedem herkömmlichen 5,25" Einbauschacht
|
| • |
Nimmt 2x 2,5” SATA/SAS HDD/SSD und 1x 3,5” HDD oder Einbaugerät auf
|
| • |
Unterstützt 2,5” SATA/SAS HDD/SSD mit Bauhöhen von 7mm & 9,5mm
|
| • |
Unterstützt SATA 6Gbps oder SAS Single Channel (benötigt SAS Host)
|
| • |
Active Power Technology (APT) - spart Strom wenn kein Laufwerk eingesetzt ist
|
| • |
Blaue LED für jeden 2.5” HDD/SSD Laufwerksschacht
|
| • |
Abnehmbarer Staubschutz für den 3,5" Einbauschacht
|
| • |
Widerstandsfähige Trays und ein durch Metall verstärktes Gehäuse für maximale Haltbarkeit
|
| • |
ExpressTray Mini System für eine werkzeuglose und einfache 2,5” HDD/SSD Installation
|
| • |
Viele Lüftungsöffnungen für eine optimale Kühlung
|
| • | Unterstützt Halteclips für 7 Pin SATA Anschlüsse |
| • | Kompatibel zu unseren Wechselrahmen für 3,5" Einbauschächte wie dem MB991SK-B oder MB992SK-B |
| • | Entwickelt für Power User und Systemintegratoren, platzsparende 2,5" HDD/SSD Hot Swap Anwendungen |
| Modellnummer: | MB322SP-B |
| Farbe: | Schwarz |
| Unterstützte Laufwerksgröße: | 2 x 2,5" SSD / HDD & 1 x 3,5" HDD/Gerät |
| Kompatible Laufwerkstypen: | SATA / Single Channel SAS (SAS Host nötig) |
| Max. Anzahl an Laufwerken: | 3 |
| Max. Bauhöhe: | 2,5": 9,5mm / 3,5": 26,1mm |
| Einbauschacht: | 1 x ext. 5,25" Schacht |
| Host Interface: | 2 x SATA 7-Pin |
| Stromanschluss: | 1 x SATA 15-Pin Stromanschluss |
| Übertragungsrate: | SATA bis zu 6Gbps / SAS 4.0 bis zu 24Gbps |
| Unterstützte HDD-Kapazität: | Keine Einschränkung |
| Material: | Metall / teilweise Kunststoff |
| Hot-Swap Unterstützung: | Ja |
| Produktmaße (L x B x H): | 151,1 x 145,8 x 41,3mm |
| Produktgewicht (netto): | 347g |
| Gewicht inkl. Verpackung: | 416g |
| Status-LED: | HDD Bereit: Grün leuchtend; HDD-Zugriff: Grün blinkend |
| Packungsinhalt: | 1 - Gerät, 1 - Anleitung, 20 - Schrauben |
| SATA-Anschluss Steckzyklen:: | 10.000 |
| Luftfeuchtigkeit: | 5%~65% RH |
| Betriebstemperatur: | 0°C bis 60°C (32°F bis 140°F) |
| Lagertemperatur: | -35°C bis 70°C (-31°F bis 158°F) |
| Konformität: | CE, RoHS, REACH |
| Garantie: | 3 Jahre |
F: Die Montageschrauben für das Gerät scheinen zu kurz zu sein um dieses in meinem System zu installieren. Was kann ich nun tun?
A: Für Computergehäuse die dickeres Metall verwenden können die inklusiven Montageschrauben (M3*2.5L) eventuell zu kurz sein. Bitte verwenden Sie längere Schrauben (M3*4L) um das Gerät sicher zu installieren oder kontaktieren Sie uns unter euinfo@icydock.com für Ersatzschrauben.
von AA Computers and Technology
“Overall I was very happy and even impressed with the MB322SP-B. Since this bay is part of the ExpressCage series, ICY DOCK's cheaper consumer line of products, I was initially worried that build quality was going to be an issue. After handling the drive bay for a few minutes I came to the conclusion that, while it was not as beefy as drive bays from their tough armor series, this drive bay was definitely a solid piece of equipment. On top of that the drive bay was easy to use and easy to install. When comparing benchmark results between a direct SATA connection to my motherboard vs. my SSD hooked up through the drive bay I found that the bay induced no noticeable speed reductions.”
von DB Tech Vlog
“I wish I had found this sooner.
I needed a way to clean up the inside of my computer case and the Icy Dock ExpressCage did just that. I was able to remove the drive cages in the lower portion of my case and put 2 SSDs and a 3.5" mechanical drive in a single 5.25" drive bay.”
Jetzt kaufen
Jetzt kaufen
Jetzt kaufen
Jetzt kaufen
Jetzt kaufen
Jetzt kaufen
Jetzt kaufen
Jetzt kaufen
Jetzt kaufen
*Amazon Affiliate Links
Wird Amazon als Onlinehändler für bestimmte Produkte verlinkt, so wird für gewöhnlich ein Amazon Affiliate Link verwendet. Als Amazon-Partner verdient ICY DOCK beziehungsweise die Cremax Europe GmbH an qualifizierten Verkäufen.